SOLITEX EXTASANA ADHERO®
Self-Adhesive Weather Resistive Barrier
Advantages
- Fully self-adhered membrane
- Superior UV resistance (180 days exposure)
- Ultimate resistance against extreme wind gusts
- Ideal for pre-fab systems
- Fire-retardant
Areas of application
SOLITEX EXTASANA ADHERO® provides the ultimate weather protection layer for walls and roofs under all conditions. Once fully adhered to rigid substrates, SOLITEX EXTASANA ADHERO® protects the building from wind, driving rain, and other external water sources while allowing any internal moisture to escape through the vapour-permeable, non-porous TEEE* layer. TEEE layer is robust, flexible, non-porous thermoplastic layer that prevents rain ingress while still allowing drying or moisture.
Installation instructions
General conditions
IMPORTANT INFORMATION
- This product is designed to withstand up to 180 days of UV exposure before installing cladding.
- This product can withstand exposure to temperatures of up to 100 °C and down to -40 °C behind external claddings.
PRODUCT DESCRIPTION
SOLITEX EXTASANA ADHERO® is a UV-stabilised and tear-resistant self-adhesive weather resistive barrier (WRB). A non-porous water-resistant TEEE* film is laminated at high temperature between two layers of spun-bonded polypropylene with a full solid acrylate adhesive back and siliconised release paper.
WEATHER EXPOSURE
This product is a weather resistive barrier (WRB) designed to withstand up to 180 days of direct exposure to UV and still fulfil the intended use for air and water control. Exterior cladding should be detailed to prevent direct sunlight onto the membrane in service.
APPLICATION NOTES
SOLITEX EXTASANA ADHERO® weather restive barrier is designed for use over rigid wall sheathing with or without a cavity, rigid roof sheathing on pitched roofs, structural insulation panel (SIP), or cross laminated timber (CLT) in accordance with BRANZ Appraisal 989. SOLITEX EXTASANA ADHERO® has a release paper cut 250mm from the top edge for easy application. SOLITEX EXTASANA ADHERO® can be used in all NZS 3604 wind zones up to and including ‘extra high’ when applied over a suitable rigid substrate.
