Transparent Full-Surface Adhesive Membrane for Weather Protection

Advantages

  • Protects the structure against weathering during the construction phase
  • 42 days of outdoor exposure
  • Preparation work is made easier: markings, connectors and penetrations on timber floors remain visible
  • Safe working: anti-slip surface, even in wet conditions
  • Water-resistant SOLID adhesive ensures adhesion to the substrate and within overlap areas

Areas of application

Temporary protection for floors during construction

Thanks to its full-surface adhesion and polyethylene functional film, this membrane provides temporary weathering-protection for trafficable intermediate floors on multi-storey CLT (cross-laminated timber) or wooden-frame buildings during the construction period.

Installation instructions

General conditions

SOLITEX® ADHERO VISTO is to be installed with the printed side facing the installation technician; it can be installed on stable substrates such as CLT, OSB, chipboard and plywood sheets. Recesses in the substrate – such as slots, grooves, etc. – can lead to increased seepage underneath the membrane and should be avoided. To achieve waterproof installation, the membrane must be installed with no folds or creases. When installing the membrane, always use a brush or the PRESSFIX XL tool to activate the pressure-activating adhesive.

Substrate

Clean the subsurface before applying the membrane – remove any protruding elements. Adhesion is not possible on frozen surfaces. There must be no water-repellent substances (e.g. grease or silicone) on materials to be bonded. The subsurface must be sufficiently dry and stable.