Double-Sided Self-Sealing Strip


Advantages
- Ultimate water resistance on low slope roofs
- Weathertight penetrations in WRB layers
- Self-sealing around nail and screw penetrations
- Reinforced for extra strength
- Double-sided ashesion for ease of install
Areas of application
TESCON NAIDECK is a butyl rubber self-sealing tape with double-sided glue. It's designed to seal penetrations through Weather Resistive Barriers when fixing purlins, roofing counter-battens, brick ties, cladding clips. TESCON NAIDECK is compatible with the pro clima SOLITEX MENTO and SOLITEX EXTASANA membranes, including ADHERO, rigid wall underlays or rigid air barriers. NAIDECK is easy to cut and has a single release paper ensuring productivity during install. Applied to the batten or brick tie prior to positioning and fastening.
Installation instructions
General conditions
IMPORTANT INFORMATION
- Self-sealing when compressed between two rigid materials. Screw and nail penetrations will be sealed during the fixing process.
- Proven to enhance resistance to driving rain through fixings on WRB penetrations in facade tests, according to AS/NZS 4284.
- Pro Clima strongly recommends the use of TESCON® NAIDECK on roof systems below 10°.
PRODUCT DESCRIPTION
TESCON® NAIDECK is a double-sided, self-sealing strip for use on the underside of purlins & battens fixed directly to your roofing WRB or facade, where any attachment is fixed to your WRB layer and requires a penetration. Made from butyl, it has excellent self-sealing properties.
WEATHER EXPOSURE
This product is not designed for direct exposure to UV, direct contact with metal cladding or facades, or face sealed systems. Ideally, it is used in ventilated facades separated from direct contact with the cladding, using thermal breaks or timber. Exterior cladding should be detailed to prevent direct sunlight from reaching TESCON® NAIDECK in service.
APPLICATION NOTES
This product should be applied to the batten, purlin, clip, mount or the like before installing in the correct position.