Self-adhesive grommets, 15-30 mm

1. Pull pipe/cable through

1. Pull pipe/cable through

Clean the subsurface, then pull the grommet over the pipe or cable.
The plain black variant of this grommet (shown here) is intended for use on black facade membranes (SOLITEX FRONTA series) installed behind open-jointed cladding.

1. Pull pipe/cable through

Clean the subsurface, then pull the grommet over the pipe or cable.
The plain black variant of this grommet (shown here) is intended for use on black facade membranes (SOLITEX FRONTA series) installed behind open-jointed cladding.

2. Remove the release paper

2. Remove the release paper

Remove the release paper around the pipe/cable feed-through.

2. Remove the release paper

Remove the release paper around the pipe/cable feed-through.

3. Stick the grommet

3. Stick the grommet

Press the grommet into place so that it rests flat on the subsurface, stick and rub firmly to secure the adhesive bond. The PRESSFIX application tool is ideal for this.

3. Stick the grommet

Press the grommet into place so that it rests flat on the subsurface, stick and rub firmly to secure the adhesive bond. The PRESSFIX application tool is ideal for this.